Ghost 1

Project: Ghost 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm

Filaments Used:
    PLA+ Sunlu Black  Transmission Distance:
    PLA+ Sunlu Grey  Transmission Distance:
    PLA+ Sunlu Orange  Transmission Distance:
    PLA+ Sunlu Yellow  Transmission Distance:
    PLA+ Sunlu White  Transmission Distance:
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Grey
    At layer #15 (1.28mm) swap to Orange
    At layer #18 (1.52mm) swap to Yellow
    At layer #19 (1.6mm) swap to White for the rest.