TPU 95A HF filament print quality I have 2 rolls of TPU, red one with not much left and been dried months ago then stored in a sealed box brand new blue one just out of pckaging and dried for 6 hours at 70 degrees. Ran 2 prints on my A1 mini, 0.6mm nozzle, 0.3mm height, 25% infill, 4 layers top and bottom. Red still looks okay but the blue looks awful. ive popped the blue back in the airfryer for another 6 hour dry, but while that completes wondered if anyone had any ideas if something else might be causing this