Nice clean design and it printed great.

Very nice design! I used Bronze Silk and dual-color blue/red silk.

Great whistle - printed very nicely in HT-PLA

It came out great in ASA - fits perfectly in 3d-printed bottle cage

Works nicely and the print came out great. Nice design!

Works great with Bento Box! The only thing I would suggest is maybe a notch in the back for the wires to go behind the tray.

It printed great...just needed to glue and sand the bottom of the track that goes into the hole as it wouldn't stay down and it wouldn't let a ball pass through. (Minor adjustment). The pic doesn't show the yellow discs bent to fit in their notches...but this is the pic I chose for obvious reasons!

Super nice print. I used eSun Bone White, Bambu Lab Black, Bambu Lab Matte Brown, and Bambu Lab White PLA.

Great model! Printed in Ziro gradient matte "Falling Leaves" PLA.

These magnet dispenser pens work great! I printed several different sizes. I also designed a Gridfinity box to hold 5 different sizes of the magnet dispenser pens vertically, with additional slots for Gorilla superglue and Nano Polymer adhesive. I use it on my AMS riser with the Gridfinity AMS Riser Side Tool Holder by dryfiredude https://makerworld.com/en/models/917068-6x2-gridfinity-side-tool-holder-for-v2-ams-riser?from=search#profileId-878566.

Very useful print - fits perfectly, unlike the cheap plastic cap it came with. Very secure and protects both the blade and your fingers!

Nice design and a clean print, although my first attempt had a problem with the rings for the hanging parts on the bottom of the catcher. I ended up re-printing with tree supports and it came out perfect. Love the design! Filaments: Rose Gold Silk Titan Gray Silk Red Silk Painted in Bambu Studio slicer.

Nice clean print and the characters are very legible when printed on a .04mm nozzle.

Nice clean print and uses a lot less filament than other models. Very much appreciated!

It came out nicely, although I did have to do some tweaks: Adjusted eye size to 99.5% scale so they would fit correctly; had to file and sand the nose quite a bit for it to fit. The mouth was very loose, so I had to use glue. Overall, however, it looks great and was quite easy to print...no supports needed!

Printed nicely!

Fantastic model - I upsized it to 200mm width and it came out great (24 hour print on X1C).

Works great! I used Bambu Lab PLA in turquoise and white. I changed the slicer setting to "by object" for the separate colors.