Printed great in ABS. Tolerances were perfect to snap the spindle into place.

Printed well in ABS. Nice use of pins to eliminate need for support material.

printed in ABS. came out very nice. hinges perfect.

Printed well in ABS, even at 0.2mm layer height. Only disappointing thing is it has a tendency to kink at the bottom.

Used it for the chain. Printed well in ABS. good design.

Came out great in ABS. Even scaled down to 20%.

Printed well in ABS. Doesn’t look like the cover photo, but works well. I’ve also found that you can increase the breaking strength by scewing the X-Y proportions.

Prints very well in ABS. Press fit on magnet is perfect 👌.

Printed well in ABS.

This is amazing. Printed great in ABS.

Printed great in ABS. Small size perfect for 12oz cans.

Came out surprisingly well. Printed with ABS. I had changed the nut density to 100% to make sure it fell on its own but I probably would have done so anyway.

Had some warping with ABS.

Came out great in Silk PLA.

Printed great in ABS. Nice snug fit. These are great; unprotected 9V batteries are a serious fire hazard.

Printed well in ABS. No issues. Very useful!

Printed great in ABS. Fits nice and snug. No scaling was required.

Came out great in ABS and supports removed easily.