I've been cooking some more patterns for my lithophane frames, but not for the sides this time! Here's a sneak peek of an early test pattern for the front, using translucent filament for the areas I want the led board light to shine through. What do you think?(Edited)

Today I uploaded not 1, not 2, but 3 models. The reason is simple, and a bit shameful... For years my entryway was a place to dump my stuff, and the growing amount of wallets didn't help (I made those wallets too!). I finally organized it with a watch stand, a catch all tray, and a vertical organizer. These are all customizable too! Below is the watch stand, and a collection with my customizable models here (https://makerworld.com/en/collections/24456398-customizable-models)

For a long time I wanted to prank my dad in an unexpected way. He's the kind of person that never falls for pranks and even doubles down on you. But not this time. I wanted to make something tool-related that seemed impossible, and since I've been recently studying gear mechanisms, I came up with the idea for a reversed screwdriver, which uses a planetary gear transmission to reverse the rotation from the handle to the shaft. Enjoy the result! #2026Aprilfoolsday #Contests(Edited)

It does hit the corners, eventually... #Comingsoon

As with my Lithophane Frames for the CMYK LED board, I'm releasing an update with 5 new frame patterns for the 3-Size Board Kit. Since these are 3 sizes, there are only 5 patterns instead of 10 for the other model. I will release the remaining patterns on a later date though! #Newmodel(Edited)

Hi community! I'm in the process of porting this model for the X1/P1S door handle from Open Scad to Fusion, since Bambu has integrated Fusion and my model is a bit limited (well, I am the limited one in open scad), but fully functional! The customizer will have a larger range of sizes and shapes, easier export/import to slicer, and a 0.2 profile! With this post I want to ask people who have an X1C or P1S AND and a P2S, so you can tell me if the door handle in the P2S has the same screw holes, and if the magnet is just placed next to the right screw. Also the magnet size. Thanks!(Edited)

Since Bambu released a Fusion integration, would you be interested in my Lithophane Frame being customizable? For example border width or corner radius, if you like frames more square, slimmer or larger. Feel free to make a suggestion!