Love it, love it. Printed for the most part really well. The default orientation of the bottom cover should be flipped 180 so the countersink holes point up and print better, but that's the only change I made when printing. I actually printed it in the default orientation and had to re-print. Assembly instructions are fairly good too and that portion went very smoothly. I would love if it was bigger. It current is 10" or 255mm tall. If I printed again, I wouldn't use the rose gold PLA recommended because it looks to pink for my taste. I would look for something that looks copper color and if I couldn't find that go with a wood colored filmament.

Love it, love it. These make the perfect gift for a 3-6yr old. I print in PETG and would not recommend PLA as it's a little more brittle and the toy will break faster.

Love it, love it. These make the perfect gift for a 3-6yr old. I print in PETG and would not recommend PLA as it's a little more brittle and the toy will break faster.

To date, my favorite clicker!

Cool design. I did have to size down the small pin for the handle by 93% because it was too big to fit through the handle hole. Not a big deal, but should be fixed. I would rate it 4.5 stars because of that issue but since you can't do halves, I rounded up

Why this doesn't come default for the X1/P1 series printer on the back left side of the build plate is a great question. I didn't realize how big of pain aligning the plate was until I put this on and now see how extremely easy it is every time to do. Love it!