Ever tried using a contact sensor on an up-and-over garage door? Yeah… it kinda sucks 😅 The problem is simple: these doors don’t move linearly, so your sensor alignment breaks at the wrong moment → false states, unreliable automations, frustration. So I designed a small solution: a tilt hinge mount that transforms the movement into something predictable. No electronics, no hacks. Just geometry doing the job.

Finally solved the DJI Mic Mini helmet mounting problem 👇 I couldn’t find a clean and secure way to mount the DJI Mic Mini on my helmet… so I designed one. • Super tight fit • Built-in magnet for extra safety • Designed to work with helmet clips (Dango / DJI style) • Fixed in place using Sugru Simple, but extremely solid. Curious to see how others are mounting their mics 👀

Ever removed a door handle during renovation? You’re left with that ugly hole staring at you. So I designed a simple minimal cover plate to keep things clean while waiting for installation. Fast print. No supports. Low filament usage. Sometimes the simplest prints are the most useful.

I designed this simple yet practical mount to easily attach my Eufy 2C Pro camera to the L-brackets of an outdoor AC unit. No screws, no drilling – it just locks in place by design. I added a couple of hot glue points just for peace of mind. Works great for balconies or terraces where you already have those support brackets and need a solid place to mount your camera.

Here’s a remote control holder for the IKEA Skådis pegboard 🎛️ I designed it to fit most standard remotes – the internal space is 57/58 mm wide. Super easy print, mounts like all Skådis accessories, and helps keep the desk or living room neat.

Sharing a tiny OpenGrid Lite snap I made by first generating it with the OpenGrid generator and then customizing it with Bambu Studio modifiers ✨. I added side slots so you can pass zip ties or velcro straps through. It’s super light (~1.5 g), prints in less than 5 minutes ⏱️, and is really handy for securing cables or accessories.

Hey Makers 👋 I’m sharing a small personal project: a wall mount for vinyl records so you can display your LPs like artwork instead of keeping them hidden on a shelf. The design is minimal, prints in no time and can be mounted either with double-sided tape or with a screw + wall plug for extra hold. I use it to switch the record on display every now and then, and it became a really nice habit 😍 If you give it a try, share a photo of your setup – I’d love to see your records on the wall!

Hey makers 👋 I wanted a clean way to mount my Aqara FP1-E sensor on an Ikea Skådis board, so I designed this little 3D-printed holder. It works like a pocket: just slide in the metal plate that comes with the sensor (or any similar plate), and the sensor will snap in magnetically. No screws, no messy adhesives — and you can move it around anytime. Curious to hear what you think — would this be useful in your setup too? 🔧✨

Custom minimalist handles for IKEA Maximera / Veddinge (16.6 mm panels).

KTM-Themed Wall Clock – Ready to Race! 🕒🏍️