Another top class model ! A long print time on my P2S and had to make a few tweaks to accommodate managing 5 colors but after 49h 40mins, the result is excellent. Keep up the great work PB. (p.s. If you ever get around to considering the Grumman Hellcat and Curtis Warhawk I'd be a happy lad).

Great mini-print! Printed perfectly although I did find I needed to glue the seats and the steering column in to place as the act of pushing each component in to place first time weakened the connection points inside the jeep body.

Definitely the most frustrating and challenging 3D print/assembly model I've done to-date. 2.5 days to print all parts successfully including having to split some off to separate plates just to get a successful parts print then another 5+ hours of removing support material. However, a decent looking model at the end of it. Always loved Space 1999

Great little print. I wanted the flask body to be green (seemingly chemical) and made the top part transparent. Took almost 5hrs45mins to print but came out perfect!

Another flawless print courtesy of PB94!

Originally printed the iris fins with Silk PLA which turned out to be a bad idea, same with the inner rotate ring. Had to scrap the inner workings but after re-printing the iris fins and inner ring in plain grey PLA, greasing the cams with silicon oil and a fair amount of finagling of the fins and cams I ended up with a great looking and working model. Also used Tinkercad to make a simple but effective, low profile base. I can actually rotate the Stargate ring in the base! :)

Printed this for my wife and she is delighted with it!

Another Superb Model from PB94! Total print time on a KDEAVI cold plate was 8h 45mins but the result was the level of quality we've come to expect.

Great little mini-guitar prints. Printed on Bambu P2S at 0.16mm

Does the job although the guitars are so light weight that they don't stay in place without taking 2-3mm off the length of the neck support and adding some kind of double-sided adhesive tape inside the curve of the neck support. Or worse case just gluing them in place

Exceptional Model Quality. Superb Print!

Great prints on the P2S/AMS2. I used a cold plate (my preferred) and rotated the amp model on its back so filament changes were minimized.

Prints came out excellent on the P2S/AMS2. I printed three for my three guitar playing relatives.