These printed great without supports. Thanks!

Excellent. These cases are perfect. I printed in PETG and had no issues with the clasps clicking into locked position.

This printed perfectly in PETG. If you need your case to lock into a grid this is a good mod. It does make it impossible to stack with other cases unfortunately, it can be used as the bottom case in a stack though. For me I’ll stick with the original for the stacking ability.

Prints great in PETG and works great!

Printed great and works great! Excellent replacement for my broken cover. Thanks!

Excellent Printed great in transparent PETG and worked great. Fit my decades old Dewalt plug in grinder. Thanks!

Printed great, works great! I broke my cover removing it so I’m using this to be able to keep using the stock cover. Thanks!

Printed well and works great. I like this model because it’s the simplest design without any threads, just push the blade in and it clicks in place. I can’t get the blade out but I’m not that worried about it.

Printed in PETG without issues. Great design that’s very useful!

Great profile. Printed in normal PETG but used painted fuzzy skin to try to match my PETG GF main body. I also printed it on a 45 degree angle so the fuzzy would be uninterrupted on all sides.

Great model, looks great on the phone!

Printed flawlessly. Should have been the way the unit was designed by IMO Creality!! To Creality's credit it does seem like they made the Space Pi Dryer to be modded with the internal fins that hold things in place. It fits even with a large dessicant box installed. This design solves the issue of humidity getting trapped inside the dryer as well as making it easier to feed the filament into the tube.

Amazing. Same functionality as a Route Werks, being able to open and close one handed while riding. I always wanted one but couldn’t justify the cost of the thing. I printed the model on an A1 with Tinmorry PETG GF for strength. I really like the finish of the GF filament. I used two pen springs for the clip and 20mm long M3 bolts for the hinges for now. I’ll replace the M3 bolts with brass rod I can get locally, Huge thanks to EGOE for posting all these designs, they are truly production level models!!

This is another well thought out and executed model from EGOE! The mount looks great and is easy to install. I printed in Tinmorry PETG GF to match my box. I used a 5/64” drill bit spun by hand to make the holes in the side of the box using the VALET system divots as a guide. Then I used #6 x 1/2” wood screws to attach it. The screws I used don’t look as clean as the suggested hardware but it’s what I had sitting around. A small ratcheting bike tool I have was super helpful installing the screws. Thanks EGOE!

Great design, printed perfectly straight from the Bambu Handy app. Will attach to the bottom of my VALET handlebar box once I get the suggested screws so they are low profile.

There work great printed in PETG. I originally printed in PLA and the clip broke off installing them.

Printed great straight from the mobile app. They work great in skeletonized grids.

Printed great, fit the grid perfectly. Love the way they turned out.

Exactly what I was looking for! Prints great and fits any stacking bin in case you decide you want a label after printing.