Printed nicely in ASA. The HT AMS has very little room for desiccant. Even the included desiccant packets are hard to stuff in the slot at the rear. I'll be using this along with a spool-hub desiccant holder to keep the HT AMS dry. Should work well!

Printed in ASA. Printed perfectly, parts fit together well, threads work smoothly. Great design! The new single-spool HT AMS unit has almost no room for desiccant, so being able to put one of this into the spool is a big help. Thanks!

Prints great!

I only printed the middle 3 first and second rows, lower Hygrometer position. That's plenty to keep the AMS2 dry. Printed perfectly in Bambu ASA white. One issue though. The boxes are sized to fit nicely in the AMS2, but not so much with the hygrometer installed. The hygrometer bezel adds thickness, and the rear box has to be forced into place for it to fit. The hygrometer box either needs a countersink for the bezel thickness, or the box should be one or two mm thinner.

Prints perfectly and looks professional!

Printed great in PETG HF. Used NinjaFlex 85A TPU for the gasket which also worked well