Pixel Pusher

This is my solution for blistered fingers after pushing a thousand pixels by hand and with pliers. This is designed for use on a drill press. The Drill Press Pusher Base has an extended shelf to catch the bottom of the pixel more effectively and I added clearance, so the wires don't pinch. The base holds the pixel groove just proud of the top which allows the press to push the strip past the groove slightly. This enables it to seat consistently since the strip has give in it. The Drill Press Pusher Top portion is something I haven't seen designed yet. It is just a cup but I tapered the edges to focus the pressure closest to the pixel which seemed to do the trick for seating the pixel in the strip consistently.

Insert the Drill Press Pusher Top into your drill press chuck and tighten moderately. DO NOT TURN THE DRILL PRESS ON!  Place the Drill Press Pusher Base on the drill press table (I suggest gluing or screwing it to a wooden base and clamping it in place for quick work) and insert a pixel. Place the pixel strip over the pixel lining up the hole and press the two together. Whallah!

Enjoy!