Spring Giraffe
Print Profile(1)
Description
A model of a giraffe with a spring-loaded neck that can sway
Please note, please use PLA Basic for printing, avoid materials like Matte or Silk which lack strength and toughness, I haven't tested PETG
After printing, use a blade to carefully cut along the spring's grooves. The specific method is:
1. Hold the blade in your right hand and the giraffe in your left, placing the giraffe horizontally in front of you with its head facing right
2. Insert the blade into the gap of the spring on the far right
3. Keep the blade stationary, rotate the giraffe with your left hand in a clockwise direction, that is, rotate the giraffe towards you. You will find the blade gradually moving to the left, eventually reaching the base of the giraffe's neck
Boost Me (for free)
Membership
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)