Lure Box

Print the lure box, the base must be completely coated with glue, otherwise it is easy to warp, check before printing whether some parts need support, accessories need 4, or 8, 10*3 magnets, a bottle of glue, the middle reinforcing ribs (the dividing line in the middle) must be glued half by half, after gluing, use glue to combine the other half into one. After gluing everything, fill the gaps with glue or AB resin to prevent water leakage, (I did not design a teacup holder next to it, the teacup sizes are not uniform, I have reserved an accessory, you can see the drawing, you can design it yourself or download the drawing of a water cup holder from the website, and combine the two with slicing software, so you can print a holder for your own teacup size)