Search models, users, collections, and posts
deathmoth
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4.3 h
1 plate
Open in Bambu Studio
Boost
15
16
1
0
13
6
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Generic red Transmission Distance: 5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #13 (1.12mm) swap to red
At layer #17 (1.44mm) swap to Sunrise Orange
At layer #21 (1.76mm) swap to Cotton White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)