Pickleball Paddle Queue
Print Profile(1)
Description
Materials Checklist
- IRVING 1-inch x 10-inch x 4 ft. Knotty Pine Shelving Board
- BEHR PREMIUM Solid Colour Waterproofing Stain & Sealer - Tintable White Base
- IPEX CENTRAL VAC TUBING - 2"x5' (x2)
- Paulin #10 x 1/2-inch Pan Head Square Drive Tapping Screws (x2)
- Everbilt 3-1/2 Inch Tarp Rope Hook in Zinc (x4)
- Everbilt 48-inch Multi Purpose Bungee Cord
- Your 3D printed paddle mounts and skill-level plaques.
Assembly Instructions
Step 1: Prepare the Backboard Sand the IRVING 4 ft. Pine Shelving Board to remove any splinters or rough edges. Apply two coats of the BEHR White Waterproofing Stain & Sealer to protect the wood from the elements and achieve the bright, clean look seen in the reference image. Allow the board to dry completely.
Step 2: Prepare the Tubing Measure and cut the IPEX Central Vac Tubing into individual segments of 5" for each paddle slot.
Step 3: Mount the Holders Ensure all the required paddle mounts and skill-level plaques are fabricated on your Bambu Lab 3D printer. Arrange the mounts in a straight, evenly spaced row across the painted backboard. Secure the mounts and the skill-level plaques to the wood using the Paulin #10 1/2-inch Tapping Screws. Slide each cut piece of vacuum tubing into a 3D printed mount.
Step 4: Add Hooks and Bungee Install two of the Everbilt Tarp Rope Hooks on the back of the board near the top corners to act as hangers for the court's chainlink fence. Install the remaining two hooks on the front of the board (one on the far left, one on the far right). Stretch the Everbilt 48-inch Bungee Cord across the front hooks to create the blue retaining line that rests against the lower section of the tubes.
⚠️ If you print this out of PLA, it will not be weather resistant and can not leave it in the sun and rain 24/7.
Boost Me (for free)
If you found this model useful, I would appreciate a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)