Stepped Swatch
Print Profile(1)
Description
I designed this layered transparency test swatch to allow you to intuitively compare the transparency performance of the same filament roll at different layer thicknesses by setting stepped areas of different thicknesses on the same swatch. Just look at it against a light source, and you'll immediately know which thickness is suitable for a diffuser and which is suitable for a shading component.
- Multi-level thickness steps: 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2mm
- Card-style design, easy to store and label
- Uses approximately 1.3g of filament, printing can be completed in 20 minutes
To ensure visibility at 0.1mm, it is recommended to print with a 0.2mm nozzle, with a first layer height of 0.1mm and other layers at 0.08mm for the main body of the swatch to ensure accuracy of each thickness area.
-Before printing, please ensure the filament is thoroughly dried to achieve the most accurate transparency effect display.
In Bambu Studio, add text with font format: Microsoft YaHei, size 0.4mm, thickness 0.1, embed depth 0.7 (the upper part has a thickness of 0.8mm, you can adjust the embed depth yourself), set the operation to negative part.
Swatch width 3mm, thickness 1.5mm, maximum length 4.1mm. The upper protrusion is 1.5mm long, and the circular hole diameter is 4mm.
The swatch storage box is currently being designed, welcome to discuss it in the comments section, and thank you for your valuable feedback!
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)