Print Profile(2)
Description
Working to create and print all 151 original pokemon for my wall. Figured I would share so others can enjoy.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 198.4x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Basic Magenta Transmission Distance: 3
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Marine Blue
At layer #14 (1.2mm) swap to Magenta
At layer #17 (1.44mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Ivory White for the rest.
Boost Me (for free)
Any like ,follow , comment or boost helps to get me noticed. I appreciate it
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)