Herb grinder

V3

• Grinder have now different teeth
• Optimized printer settings for each object
• Magnets now fit without glue (atleast when I printed it)

Make sure to properly remove all support layers from grinder bottom part.

Added print profile for 2 parts of grinder itself - For those who have printed the bottom and mid bottom parts

Hi, I've created a model of a herb grinder.
The model has four parts; three of them are connected by a screw thread, while the top part is held in place by magnets.
The bottom part is larger and has space for essentials (paper, tobacco, and more).
The middle bottom part serves as a lid and a smaller storage for herbs. The middle top part serves as a lid, and the top side contains the first half of the grinder. The top part is then a lid with the second half of the grinder.

The grinder section has holes in the center for inserting 5x2mm magnets, which hold it together. The outer sides of the grinder have a textured surface for a better grip.

Also added very small amount of superlube on threads so it did not make squeeky sound when its assembled.

This is my first model, so I’d appreciate any advice and feedback. Enjoy
 

Required items: Magnets  5mm x 2mm f.e. https://tinyurl.com/356cn8j7 , glue, superlube