zonda_r_kid

cover

image1 (2).jpeg

image0.jpeg

image2.jpeg

image3 (1).jpeg

plate_1.png

plate_2.png

aa8c07a98a753f85.jpeg

Printed using the high quality 0.2 preset.Arachne wall generation is required. otherwise a lot of details will be missing.The model just about fits on a 256x256 bed if rotated diagonally, but it needs to be this big for the details to print correctly. It can be printed smaller, but details will be missing from all of the cars. I used the frostbite plate from Biqu to try and eliminate as much warping, but it should be fine on other plates, though haven&#39;t tested this. if trying to print on an A1 mini, it may be worth splitting the model in half as it will not look good if printed as one piece.

0.2mm layer, 2 walls, 7% infill

The evolution of Miata&#39;s, from the NA to the ND

Miata Evolution

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models