Print Profile(1)
Description
Printing:
There are small user support blocks under the side wall radiuses and it is intended to be printed with 0.2mm layer height. If you don't want these support blocks you can split the model in the slicer and then remove them. But then you will have to use another supporting method in these areas.
I printed this with PETG, 0.2mm layer, 3 perimeters.
Tips:
- If you need another width of the case, try to scale the model just in A direction. The original clearance between walls is 154mm.
- If you need to modify depth and height of the model, try to scale B and C direction using the same value!!! Otherwise you could cause problems when folding the model.
- And yes, of course you can try the overall scale ;).
Boost Me (for free)
Got an extra Boost? Your support means the world to me! I'd be incredibly grateful if you sent it my way so I can keep creating new models.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)