Search models, users, collections, and posts
mirror support
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
3
11
0
1
10
8
Released
Description
Content has been automatically translated.
This is a wall mount designed for secure mirror fixation, prioritizing stability and ease of installation. The design has been optimized for printing in PETG, ensuring the necessary flexibility for fitting and the thermal and mechanical resistance to support the weight long-term.
Design Highlights:
- Reinforced Profile: Geometry designed to prevent deformation under continuous load.
- Precise Fit: Tolerance margins adjusted for mirrors from 2 to 6mm
- Versatility: Can be used in bathrooms or outdoor areas, thanks to the material properties.
Recommended Print Settings:
- Material: PETG (highly recommended for durability and impact resistance).
- Infill: Minimum of 40% (Gyroid or Cubic pattern for greater structural strength).
- Wall (Wall Loops): 3 to 4 loops to ensure the screw does not weaken the part.
- Layers: 0.20mm or 0.16mm for a smooth finish and perfect fit.
- Supports: not required
Installation Instructions:
- Use flat-head screws of [insert size] to ensure they are flush with the support.
- Make sure to use appropriate wall anchors for your wall type (masonry or drywall).
- It is recommended to use at least 2 supports at the top for complete safety.
- the smaller pieces are placed at the base to align the mirror.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (0)