Charmander - Coaster

Coaster Description:

• Diameter: 10 cm
• Height: 4 mm
• Theme: Inspired by Pokémon sewer lids in Japan - Charmander
• Print Time: ~ 1,5 hour
• Colors Used: 11 total – Project Filament order

1. Charcoal Black
2. Army Red
3. Army Green
4. Sunrise Orange
5. Forest Green
6. Savannah Yellow
7. Rose
8. Army Beige
9. Fossil Grey
10. Sapphire Blue
11. Cotton White

Filament Swap Instructions for 1 AMS in slot number:

1. As Fossil Grey finishes:
   • Swap to: Charcoal Black
2. As Army Red finishes:
   • Swap to: Sunrise Orange
   • Then swap to: Rose
3. As Army Dark Green finishes:
   • Swap to: Forest Green
   • Then swap to: Sapphire Blue
4. As Savannah Yellow finishes:
   • Swap to: Army Beige
   • Then swap to: Cotton White

Optionally swap back and forth after it was used on layer 2 for better quality.

Printing Details:

• Layer Height: 0.2 mm
• Design Layers (1-2 layers): Printed with all 11 colors.
• Remaining Layers (up to 4 mm): Printed entirely in Charcoal Black.
• Orientation: The coaster is printed face down for a smoother surface finish on the visible side.

Filaments Used:

1. Polymaker Polyterra - Charcoal Black
2. Polymaker Polyterra – Army Red
3. Polymaker Polyterra – Army Green
4. Polymaker Polyterra - Sunrise Orange
5. Polymaker Polyterra – Forest Green
6. Polymaker Polyterra – Savannah Yellow
7. Polymaker Polyterra – Rose
8. Polymaker Polyterra – Army Beige
9. Polymaker Polyterra – Fossil Grey
10. Polymaker Polyterra – Sapphire Blue
11. Polymaker Polyterra – Cotton White

Alternative Filaments:

1. Bambu PLA Matte - Charcoal
2. Bambu PLA Matte – Dark Red
3. Bambu PLA Matte – Dark Green
4. Bambu PLA Matte – Mandarin Orange
5. Bambu PLA Basic – Mistletoe Green
6. Bambu PLA Matte – Lemon Yellow
7. Bambu PLA Matte – Scarlet Red
8. Bambu PLA Matte – Desert Tan
9. Bambu PLA Matte – Ash Gray
10. Bambu PLA Matte – Marine Blue
11. Bambu PLA Matte – Ivory White

 Copyright Notice:

• The design is inspired by Pokémon sewer lids, which are copyrighted by The Pokémon Company.
• This print is a personal, fan-made project and is not intended for commercial use or distribution.