Snus can
Print Profile(4)
Description
Designed a snus can for a friend that turned out pretty good.
Printed in PETG.
No supports needed.
The top lid turns out fantastic if you print it on a smooth plate or one with effects like the one i have used.
I print it at 80 celsius at first layer 75 at the rest, and nozzle at 250. I do the first layer at 0.12mm but the rest prints and works fine at 0.2. Could do 0.16 if you want a smoother finish.
On a smooth plate i do 25mm/s on inner and outer on first layer for better adhesion. On a textured the standard 50/105 works fine.
With Developer mode enabled i would recommend upping the Initial Layer Flow to like 1.05 as when printing with 0.38 first layer line width it fills it alot better. There are probably better settings to use aswell but i have found these works like a charm.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)