Print Profile(1)
Description
Boost Me (for free)
If you like my model, boost me! Thank you very much!!!
1. The back of the hook can be attached with double-sided nano adhesive tape or adhesive magnetic strips
2. If the front and back covers are not firmly connected, they can be secured with glue
3. The blades have thin shafts. To prevent print failure, you can clean the build plate before printing, spray adhesive, or use a cold build plate
4. Novice printers might experience print failures. The rotational connection between the blades and the linkage plate needs to be smooth. If the blades cannot rotate freely after being connected to the linkage plate, for linkage plate 1 and linkage plate 2, change the slicing parameter Quality - Accuracy - X-Y Inner Contour Compensation value to 0.05-0.1
Assembly video as follows:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)