Lighthouse
Print Profile(1)
Description
Decoration "Lighthouse"
Cabinet and/or table decoration
Model of a lighthouse without a specific prototype. (Total height approx. 210mm)
2 tea lights can be installed, one in the lower part and another in the upper part of the model.
The print file contains 6 plates
The model consists of individual parts that must be assembled with some glue after printing
Print plate 1 contains Part 1 (lower ring) (PLA Basic red)
Print plate 2 contains Part 2 (middle ring) (PLA Basic white)
Print plate 3 contains Part 3 (upper ring) (PLA Basic red)
Print plate 4 contains Part 4 (gallery) (PLA Basic white and black)
Print plate 5 contains Part 5 (door) and Part 6 (intermediate floor) (PLA Basic white and black)
Print plate 6 contains Part 7 (spire) (PLA Basic white, black and red)
Assembly:
Insert and glue Part 5 (door) into Part 1 (lower ring)
Place and glue Part 2 (middle ring) onto Part 1 (lower ring)
Place and glue Part 3 (upper ring) onto the previously glued parts
Place and glue Part 4 (gallery) onto the previously glued parts
Insert Part 6 (intermediate floor) into the recess in Part 4 (gallery)
Place Part 7 (spire) on top. (Do not glue)
The model is complete
Dimensions Diameter 95mm bottom x Diameter 50mm top x 210mm height
AMS System required
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)