Laurentides

🎄 Christmas Ornament – Engraved Winter Scene

Add a warm and traditional touch to your Christmas tree with this ornament inspired by Quebec winter landscapes. This model features a snow-covered cabin surrounded by fir trees, in a typical Laurentides, Quebec setting, under a detailed winter sky. The design is framed by a decorative ring adorned with leaves and berries, reminiscent of classic artisanal decorations. 

Printing instructions:

Print with 100% infill, a 0.08 mm layer height, and a 0.16 mm base layer.

The model measures 200 x 180.25 mm.

You can print with a higher layer height below the 0.48 mm base thickness.
The maximum allowed thickness is 2.24 mm, and the actual thickness is 1.92 mm.

Filaments used:

• Bambu Lab PLA Matte Ivory White – Transmission Distance: 0.3
• Bambu Lab PLA Matte Dark Blue – Transmission Distance: 3
• Bambu Lab PLA Matte Ash Gray – Transmission Distance: 1
• Bambu Lab PLA Matte Ivory White – Transmission Distance: 5

This model uses 4 different filaments.

Filament change instructions:

• Start with Black
• At layer #9 (0.8 mm): switch to Dark Blue
• At layer #13 (1.12 mm): switch to Gray
• At layer #15 (1.28 mm): switch to White and continue until the end