Fire lady
Print Profile(1)
Description
Another one! I have enabled a pause to change your filaments in AMS .Post pics of your makes and have fun!
Project: fire lady.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
PLA BambuLab Basic Yellow Transmission Distance: 5.9
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #29 (1.24mm) swap to Red
At layer #35 (1.48mm) swap to Pumpkin Orange
At layer #40 (1.68mm) swap to Yellow
At layer #41 (1.72mm) swap to Beige
At layer #46 (1.92mm) swap to White for the rest.
Boost Me (for free)
Remember to boost prints you like!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)