Lamb

Hi, I'am Rocket luo :

    First, there are quite a few disassembled parts this time, and printing will take a longer time, but fortunately, it's finally complete. Please make sure not to miss any parts when printing them out

    Now I'll put the assembly process here. If you have any questions, you can refer to it

    1) First, here are the parts that will be printed out, all marked. Make sure not to miss any, and check if you have enough

    2) Then, assemble the parts according to the sections I've circled. Here are a few issues I encountered during assembly that you can try to avoid

      Note: 1. When scraping the face off to remove supports, the neck area is more prone to breaking. Handle with care, and if it breaks, use glue to reattach it

                  2. When assembling the face and hair, you need to apply a little force to push them in

                  3. The gap left for the eyes is too small. First, attach the black eyelashes, then push the eyeballs in

                  4. When assembling the shoes and black socks, first pre-fit them to ensure they are correct, then secure with glue. The same applies to other parts; you can pre-fit them to ensure they are correct before gluing them tightly

    3) Then, assembling all the parts will basically complete it. Congratulations, we have completed another 3D printing journey together!

 Finally, thank you all for your support. If you also think it's good, you can give a free boost to help more people discover it, which would greatly help me. If the officials see it, I hope they can promote it to more people. Thanks again! See you in the next project!

If you think my model interesting, I would be very grateful if you could give me a follow or a free boost. This is extremely important to me. 
Also, I hope you can post the printed model in the comment section to share your achievements with more people, spread more joy, and see you in the next project!