Fleischmann train stand

This is a compact display stand for Fleischmann Piccolo N scale model trains.

The stand features four small alignment pins, which are part of the stand itself. These pins are positioned on the sides of the track bed, so the track is gently pressed between them. This holds it firmly in place without the need for clips or glue.

In the photos, I used two connected stands to display a locomotive with several wagons behind it — but of course, you can use just one, or as 

many as you like depending on your setup.

The stands and optional end pieces are designed to be glued together for a seamless and stable display.

This model is designed for the Fleischmann Piccolo N scale track with bedding, specifically the 222 mm straight section.

The label plate with the train name or type was created using the MakerLab Nameplate Tool (on makerworld.com), and is not included as part of this design – but you can easily create your own using that tool.

✅ Fits N gauge (9 mm)
✅ Designed for Fleischmann Piccolo track (222 mm with bedding)
✅ Track is held in place by side pins on the stand
✅ No supports needed when printing
✅ Modular — extend the display by adding more segments
✅ Optional: add your own nameplate using the MakerLab tool