sonic
Print Profile(3)
Description
Bonjour à tous, j'ai créé une affiche de Sonic à l'aide du logiciel HueForge
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Je peux essayer de réaliser pour vous des tableaux HueForge à partir d'images ; envoyez-moi vos demandes en message privé.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Support Hueforge used https://makerworld.com/fr/models/1636945-support-hueforge-9g#profileId-1729333
Wall Mount Hueforge here https://makerworld.com/fr/models/1705344-hueforge-wall-mount-photo-stand#profileId-1808917
Boost Me (for free)
Merci^^
Project: Sonic2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177.42x248.39mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Blue
Border Only Colors from here until the end.
At layer #21 (1.76mm) swap to White for the rest.
Hésiter pas a envoyer une photo de votre impression final :)
Support Hueforge used https://makerworld.com/fr/models/1636945-support-hueforge-9g#profileId-1729333
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)