Drying Box

This desiccant box design allows for secure closure at any angle, measuring 10x10x12cm. For optimal transparency using standard settings, a nozzle temperature of 260°C is recommended, with 100% infill using only straight extrusion paths and a 0.1mm layer height. Exterior wall speed should be 20mm/s, while interior walls can be printed at 100mm/s. Employing a smooth build plate and disabling the cooling fan significantly enhances transparency, although print time increases due to the higher temperature and thinner layer height. The lid may be somewhat difficult to insert or remove due to the high temperature and low layer height; applying release agent to the slider may resolve this issue