Search models, users, collections, and posts
BoxTurtle Gcode Buttons
IP Report
Print Profile(2)
0.12mm layer, 2 walls, 15% infill
Designer
2.8 h
4 plates
4_bay_front_skirt_x2
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
6
11
2
0
4
0
Released
Description
Content has been automatically translated.
Gcode Buttons for BoxTurtle
Button functionality is customizable,
with RGB lighting effects customizable via led_effect,
Bill of Materials for Four Buttons
- 6*6*6 tactile switches x4,
- WS2812 (or SK6812) PCB RGB LEDs x4,
- M1.6*7 countersunk self-tapping screws x16,
- M1.6*5 countersunk self-tapping screws x8,
- Fine wires; ribbon cables are preferred.
For optimal light transmission, it is recommended to 3D print the LED diffusers using translucent PETG, and the button and button base mid-sections using a translucent material; white works well.
The total switch height is 6mm, i.e., L=6mm in the diagram.
Please download the RGB logo shown in the image from the author's GitHub repository.
https://github.com/MakerMylo/BoxTurtle_Logo_Skirts
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)