Lockheed SR-71

The SR-71 Blackbird, developed by Lockheed throughout the 1960s, was the ultimate embodiment of an air reconnaissance beast. Boasting revolutionary designs and unprecedented speeds of well over Mach 3 with altitudes excess of more than 85,000 feet, most any defense attack became basically an impossibility. With innovative, leading-edge, structural machined titanium and smothered with radar-absorbent materials, the SR-71 was truly the engineering marvel at the time. The Blackbird was operated primarily by the United States Air Force and provided very critical intelligence during the Cold War. Retired in 1999, the SR-71 is an iconic symbol of technological innovation and aeronautical achievement.

But now lets get to assembly, first you will need super glue and sand paper for the build.

Next drop 3 drops of glue on to the base and glue the name plate as shown below

Put a drop of glue in the hole on top and put to plane holder in.

After that pinch it together and hold to help stick.

Now lets make the lithopone, break of the supports

If it doesn`t fit into the base sand the bottom

Now fit it into base

Ok the base is ready time for the plane. drop glue in holes of the bottom part of the SR-71

Next put the pins in.

Drop some glue in the holes of the top part

And join the pices

Put it on the stand

Thank you for printing this. :)