printed great and works great with the bin. I modded it to fit A4 paper and it works great for that too :) I'll upload the A4 profile. Since it was my first time scaling a model and multiple parts, and making a dovetail joint: - Move all the pieces that need to be scaled onto the same plate and join them into one, when you do this they'll all scale together - Change the X scale and don't make it uniform, on the main body (the two feet) set X to 275mm - Then choose Split -> Into objects so they can be printed on separate plates again (for this model, the linear frame and the "locking pieces" needed to be resized to fit Then, to create the dovetail joint, select the object you want to split, click the Cut tool, change the mode to Dovetail, and align the joint with where you want the cut. What I did on this model was shift Y to 90 and then align the cut between "FUSION" and "BUDDY." The default cut will shift one of the objects for strength, so don't "correct it."

I had given up on these bags and my pump and I giggled when it suddenly started drawing the air out, thanks for fixing a problem I didn't know could be fixed 😁

Printed great. I modified it so it's 3 compartments because my mom wanted one to be bigger and tried a couple of different sizes. For the scaled down the locking mechanism broke off when I tried to pry it loose, and fair, the slide has enough friction to keep it in place for now. :) Thanks!