The design is excellent but had to heavily modify the print profile. First couple attempts failed and wasted a lot of filament in the process. changed to a variable layer height of 0.2, and increased supports on the legs otherwise they detach mid-print just before they attach to the main body. With the adaptive layer height, it printed most of the model at 0.1 or less and took around 36 hours. Finished product looks good but took forever and wasted a roll of filament trying to get it to work.

Nice design, but needs to be a bit taller. Some of my kids trains don’t fit.

The cutouts for the nozzles are backwards and have the fan up instead of the side with the nozzle size printed on it. Mirror the print and it should be fine.

Funny print, but the hex peg on the leg is slightly too big and split the base.

I highly recommend this print. Makes all the difference.

Great gift. I recommend using a smooth plate to give it more of a factory look.

Good print. Very sturdy. Modified the top and bottom layers to green, and changed to print each item individually so there was no filament waste.

Very happy overall. With all multi-colour prints it wastes filament. it could be designed so the logo is a plate that attaches on afterwards. it’s important to note that the second colour is also used as fill during the logo height, so if the main colour is light and logo colour is dark, it will show through the walls of the print.