excellent

Pllate 1 needs to be rotated 90 Deg as print is at max on the left and right side of build plate. my P2S during print hit the left side of machine because of this and would need to re-zero head during print multiple times. Issue solved by just rotating print by 90 Degrees.

great print, make sure parts have no burrs so that when assembled gear can move easily. also not press fit, small amount of glue needed to lock cover plate

perfect and clean

perfect…. absolutely love it…. great design no more pipe rubbing on the glass. I can open vents when printing PLA, design fits perfect on the P2S. keep up the great work

I could not get my AMS lower than 30%, printed 3 sets now AMS is down to 10%. Amazing design printed in PETG-HF Translucent so that I can see the desiccant inside. PETG in case heat gets up in AMS. I had to redo 1 of them as it fell over during print possibly from vibration so I am reprinting with 20mm brim and slowing down base layer speed just so it sticks to bed well. Fantastic design, keep up the good work. 10/10