red hood
Print Profile(1)
Description
Project: Red hood
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.52mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm
Filaments Used:
PETG JAYO Gray Transmission Distance: 2.5
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Pink Transmission Distance: 0
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Gray
At layer #4 (0.4mm) swap to Black
At layer #12 (1.04mm) swap to Jade White
At layer #13 (1.12mm) swap to Pink for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)