Pill Box

UPDATE: After a request, I uploaded a print profile that has indexing bumps to align slots.  Red top is because it ran out of grey and switch to red.

I am on a lot of meds and the smaller containers don't hold all my meds.

I originally wanted this for when we travel, but now I use it all the time. I use one for nighttime (blue top) and one for morning (white top).

My original design used a nut separate with the box having the bolt, but I twisted too hard once and the bolt broke off and I had to reprint the box. So, I decided to reverse and have the bolt screw into the box. This way, if it does break (not likely if printed at 100% infill) then you just need to reprint the bolt.

Along with the seven days of the week, it has an eighth slot so that it can lock it closed.

Originally, I had the days of the week indented but now they are raised (easier for my old eyes) and printed raised on the outside. You shouldn't need support for this but your slicer may add it by default.

The profile has the bolt as 100% infill.