pantera
Print Profile(1)
Description
Project: pantera.hfp
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm
The model is 175.17x175.17 mm in size.
You can print at higher layer heights below the minimum depth of 0.8 mm.
The maximum depth is 2.6 mm and the actual depth is 2.2 mm
Filaments used:
PLA PolyLite Black Transmission distance: 0.3
PLA BambuLab Basic purple Transmission distance: 4
PLA BambuLab ice blue Transmission distance: 6
PLA PolyLite White Transmission distance: 5
This print uses 4 unique filaments.
Swap Instructions:
Start with black
At layer #13 (1.12 mm), swap to purple
At layer #18 (1.52 mm), swap to ice blue
At layer #23 (1.92 mm), swap to White for the rest
Boost Me (for free)
If you like my models, help me with a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)