Search models, users, collections, and posts
Sphynx Cat
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
7.4 h
1 plate
Open in Bambu Studio
Boost
55
96
11
10
83
30
Released
Description
Project: Sphynx_Cat_HueForge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 4.1mm and the Actual Depth is 4.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Silver Transmission Distance: 1.5
PLA PolyLite Black Transmission Distance: 0.6
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.16mm) swap to Silver
At layer #23 (1.96mm) swap to Black
At layer #34 (2.84mm) swap to Silver
At layer #39 (3.24mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (11)