Romwba3D

cover

gizmo_1.JPG

IMG_8014.JPG

gizmo_2.JPG

gizmo_3.JPG

IMG_8012.jpg

IMG_8016.jpg

knocker1

plate_1.png

knocker2

plate_2.png

17F7EC58-6705-4874-8598-2C91C2FA10ED.webp

plate_1.webp

plate_2.webp

0.2mm layer, 3 walls, 15% infill

plate_3.png

plate_4.png

KittyKraft

IMG_2346_998b7373-3d42-4416-8b9e-0e5075213974.webp

0.16mm layer, 2 walls, 15% infill

Modified Versions

HotFix

20260105_231618.jpg

20260105_131330.jpg

20260105_231624.jpg

20260105_131404.jpg

As requested, I have posted the version I made with variable layer height to really max out the detail as much as possible, in addition to tweaking the seam alignment for a more uniform look.&nbsp;In this version I also did the following to the 2 knockers on 1 plate:<ul><li>Pained the seams on the cheeks and ears to try and control the seam layout a little better. I left the original unmodified versions on separate plates.</li><li>I modified the supports in the ears knocker so the supports only went into the ears some so you didn&#39;t have to dig out a tunnel of supports (not fun). I also modified the supports in the mouth knocker so were a little easier to remove.</li><li>I added cutouts on the mouth knocker so the ring would actually lay flat versus stick up when centered or rotating to the left/right so it could lay flat and look off.</li></ul>

Variable Layers, Fixed Mouth & Supports, & Painted Seams

cozmogeek

IMG_3302.webp

Printed with 0.08mm layers, primed, sanded, then painted.

0.08mm layer, 3 walls, 15% infill

A fan art of both of the Knockers from the Cult film the Labyrinth , these are fully working and also have a slot for wall Mounting in the back of the model &nbsp;I have uploaded 3mf Print profiles for the X1C/P1P however they will also fit on the A1 Mini&nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Labyrinth Models available on the patreon including Ello worm, ludo and Hoggle&nbsp;You can view all the Available Models - now over 200 on https://www.romwba3d.com

Labyrinth Knockers

ASIA

Print Profile(4)

Description

Comment & Rating (260)

License

Related Models