Firewatch - Hueforge
Print Profile(1)
Description
This is HueForge of my favorite desktop wallpaper. It uses 7 colors, because this was kind of test for me of using more than 4 colors in hueforge.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x149.71mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Spectrum Navy Blue Transmission Distance: 2
PLA Spectrum Signal Violet Transmission Distance: 2.5
PLA BambuLab Basic Pink Transmission Distance: 8
PLA JamgHe Blue Transmission Distance: 3
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Navy Blue
At layer #8 (0.72mm) swap to Signal Violet
At layer #11 (0.96mm) swap to Pink
At layer #14 (1.2mm) swap to Blue
At layer #18 (1.52mm) swap to Ice Blue
At layer #25 (2.08mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)