Hidden electronics power
Print Profile(4)
Description
System for hidden installation of power interfaces (connectors) for electronics and devices
Important!
These models are designed for informational purposes for testing
They are not a certified mechanism
All operations must be performed by appropriately qualified personnel
The author is not responsible for the operation of your electrical equipment
It is cut into a segment of skirting board, decorative trim, etc. allowing it to slide upwards (slider)
It has a replaceable central insert (flat or recessed) for direct cutting of power connectors, buttons, switches, etc. into it (select the required insert before printing)
It is secured with self-tapping screws (with pre-drilling) or glue/liquid nails, power lines are supplied from the rear from the cavity (channel)
Before initial assembly, apply silicone grease to the guides!
Module dimensions (external): 50x100mm, 50x50mm, 30x100mm, 30x50mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)