Parametric Gridfinity Bin — Fully Customizable
Print Profile(1)
Description
A fully parametric Gridfinity-compatible storage bin, built from scratch in OpenSCAD and tuned for the MakerWorld Customizer. Set your own size, compartments, and features, then download a print-ready model in seconds — no CAD software required.
FEATURES
- Spec-accurate Gridfinity base profile (42mm grid, 0.5mm clearance, standard 3-step stacking lip) — fits any standard Gridfinity baseplate
- Adjustable size: 1–6 units in X, Y, and Z
- Optional internal dividers, evenly spaced, with adjustable thickness
- Optional magnet holes (4 corners) with a built-in support-free chamfer
- Optional 45° finger scoop for easy one-hand access
- Optional lightweight floor relief to save filament
- Adjustable wall thickness and inner corner fillet
- Prints with zero supports in standard orientation
HOW TO CUSTOMIZE
Hit "Customize" on this page (or open the .scad file in OpenSCAD) and adjust the sliders — bin size, number of compartments, magnets on/off, finger scoop on/off, wall thickness, and more. Every combination is validated automatically, so you can't generate a broken model.
PRINT SETTINGS
- Layer height: 0.2mm (0.12–0.16mm for extra-clean walls)
- Wall loops: 3+ recommended
- Infill: 15% is plenty for a storage bin
- Supports: none needed
- Orientation: print as-is, base down
- Material: PLA or PETG both work great
- If using magnets: pause and insert 6x2mm magnets at the prompted layer, or print the holes empty and glue magnets in afterward
If you print this, I'd really appreciate a photo upload and a Boost — it helps a lot and costs nothing! Questions or feature requests are welcome in the comments, I read all of them.
MAKE SURE TO VISIT MY PROFILE FOR MORE MODELS
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)