Search models, users, collections, and posts
Print Profile(1)
3 Plates with high infill
Designer
8.3 h
3 plates
Open in Bambu Studio
Boost
0
4
0
0
0
0
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
I was inspired by the reveal watch from projects. I made a clock rendition of it.
Assembly:
- Press the clock movement into the clock face's square hole. It should friction fit. If not, you may glue it with super glue, making sure to avoid the center axle.
- Push the clock face into the main frame. I would recommend using something like PLA gloop or Loctite to secure it, as the friction fit isn't enough.
- Install the disks: place on the hour disk until it is all the way in. Make sure to add a small gap in between the clock face surface and the hour disk. Then, push on the minute disk. Make sure the two disks are in the 12-o-clock position by aligning them manually.
- Set the time using the wheel on the back of the clock.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)