Adjustable Tablet Stand

Simple print-in-place phone/tablet stand with four versions:

• Tablet stand with a lip for tablets up to 11 mm thick
• Tablet stand for a kids case for cases up to 17 mm thick
• Tablet stand without a lip for any thickness tablets
• Tablet stand without a lip for kids cases of any thickness

All four models can be printed without supports, however, for best results I recommend using your slicer to paint a support under the lip for the two models with lips.

The settings I used are:

• PLA / PETG
• Layer height: 0.2
• First layer height: 0.2
• Infill: 15%
• Infill pattern: Gyroid
• Supports
  • No supports for models without a lip
  • Supports only under the lip for the models with a lip

First

 published on printables.com.