Cup Holder
Print Profile(3)
Description
A cup holder quick to print and adjustable to three sizes.
There is also an optional wall mount - one for double sided adhesive pads and
one that can be screwed on.
All parts are printed in the direction that ensures maximum strength.
As this is a functional part I HIGHLY recommend to print this in PETG.
During my test prints I also printed it in BambuLab PLA Basic but the flexibility of
PETG, especially as far as tha strap is concerned is far better.
In the print profile I use 3D Honeycomb for the infill of the strap. Please do NOT change this,
because during my testing I found this is best suited for that task.
Assembly ( like in the attached PDF )
1. Insert handle into holder (has a side pin that prevents wrong direction)
2. Insert lock plate (ensures handle is mechanically locked to holder)
3. Insert strap (also has pins that prevent wrong insert direction) - Three possible length positions
Large - use both outer holes
Mid - use one outer hole and one center hole
Small - use both center holes
4. Put cover through handle and press it on holder (two pins clamp into holder)
Have fun
Boost Me (for free)
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)