Flywheel puller
Print Profile(5)
Bill of Materials
- Schraube M10x50mm x 1: Als Abziehmechanismus
- M10 Mutter x 1: Für die Schraube
Description
Here I have a flywheel puller for flywheels with M24 thread.
The print file has a pause so that a standard M10 nut from the hardware store can be inserted into it.
I recommend using at least PETG (in my example, it worked very well with PETG CF), furthermore, it's best to set the print speed to Quiet (slow 50%) to achieve a very good thread.
So simply:
Start the print, wait until the printer pauses, then insert the M10 nut and resume printing.
The nut will then be printed into the model, and you can use the puller with a normal M10 screw.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)