Print Profile(1)
Description
Add a fun and colorful touch to your table with this coaster inspired by our favorite experiment! This design has been specifically optimized for 3D printing, using different height levels to facilitate filament changes or the use of AMS/MMU-like systems.
🛠️ Print Details (Recommended)
* Layer height: 0.2mm (standard) for a good finish.
* Infill: 15-20% (Grid or Gyroid pattern works perfectly).
* Walls: 2 or 3 lines to ensure watertightness against possible spills.
* Material: PLA for decorative use, or PETG if you're going to place very hot coffee cups (it resists temperature better).
🎨 Color Guide / Layer Changes
If you don't have an AMS, you can program a pause in your slicer (Bambu Studio / OrcaSlicer) to change the color manually:
1. Base (White): From layer 0 to the character's base.
2. Details (Blue): For the outer edge and the protruding body of the character.
💡 Extra Tips
* Ironing: Activate the Ironing function on the top surfaces to get an ultra-smooth and professional finish, almost as if it were injected.
* Scaling: The design is a standard coaster size (approx. 80mm), but you can scale it along the Z-axis if you prefer it thicker or thinner.
Did you like the design? Don't forget to upload a photo of your print and leave a comment! It helps me a lot to keep creating.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)