Elder Bear Series
Print Profile(1)
Description
Requires four colors: black, white, blue, and cyan. The filament, combined with the AMS box, will automatically change colors. Print with default settings (the slicer may show some unsupported areas, but direct printing is unaffected; I didn't add a prime tower, but you can add one if needed). I tested with a 0.4 nozzle, and Eryone's PETG filament worked fine. If you need to adjust the size, remember to disable proportional scaling and adjust the X and Y dimensions. It takes two and a half hours for P2S to print four on a single plate.
Note: Cyan can be directly replaced with green and white; just adjust the color change layer height in the slicer.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)